KCC

hi everyone, try install sharepoint server 2013 on microsoft server 2016 when start prerequinstaler it's stops on iis configuration step configuration error, os date. log file: 2017-07-20 10:45:31 - processor architecture (9) 2017-07-20 10:45:31 - reading following string value/name... 2017-07-20 10:45:31 - common startup 2017-07-20 10:45:31 - following registry location... 2017-07-20 10:45:31 - software\microsoft\windows\currentversion\explorer\shell folders 2017-07-20 10:45:31 - value is...  2017-07-20 10:45:31 - c:\programdata\microsoft\windows\start menu\programs\startup 2017-07-20 10:45:31 - trying remove startup task if there any. 2017-07-20 10:45:31 - c:\programdata\microsoft\windows\start menu\programs\startup\sharepointserverpreparationtoolstartup_0ff1ce14-0000-0000-0000-000000000000.cmd 2017-07-20 10:45:31 - error: startup task doesn't exist. not continuation after restart. 2017-07-20 10:45:31 - locating following command line arguments fil...

i have domain called domain1.com installed on server1. have added additional domain controller domain1.com on server2. want delete additional domain controller , want create new domain called domain2.com on server2. both domain1.com , domain2.com have in single forest. possible? have do? thanks , regards, radhakrishnan first need run dcpromo on server 2 , demote it. make sure none of dns entries exists in dns server 2. after disjoin computer domain (i.e domain1.com) once done need run dcpromo on , choose domain controller new domain on domain controller type page , click next. refere below article explain step step procedure accooplish this http://technet.microsoft.com/en-us/library/cc782483(v=ws.10).aspx refer below discussion well http://www.techexams.net/forums/ad-infra-70-294/40466-new-domain-root-tree-existing-forest.html once done make sure dns on server 2 setup properly. regards, _prashant_ mcsa|mcitp sa|microsoft exchange 2003 blog - http://prashant1987....

hi, i trying copy 4 tb of data portable nas device server's local storage, both connected same network switch. network speed @ 10 gbps. mapped shared folder on nas , dragged , dropped data start copy process. been on 24 hours , still shows "preparing copy...". windows trying determine how data copy , @ 900 gb far. slow! is there way skip "preparing copy" step , start actual transfer of data? any third party tool can copy fast? any suggestions? thanks use robocopy instead. Windows Server  >  Windows Server General Forum

hi there, i'm in bit of pickle. i'm try configure http endpoints in sql server upon vista. doesn't work! a spot of searching later , managed find a post here: http://www.dotnetconsult.co.uk/weblog/categoryview.aspx/vista  that talks needing httpcfg.exe vista. guy managed form old win2003 eval disk - haven't got that.     anyone know can from?   any help/advice appreciated!   -jamie   a quick search of mscom (via search provider plug-in ie7 ) yielded link xpsp2: http://www.microsoft.com/downloads/details.aspx?familyid=49ae8576-9bb9-4126-9761-ba8011fabf38&displaylang=en   i'm checking http.sys team confirm work on windows vista, , if not, right tool use. Windows Server  >  Platform Networking ...

hello, i need create group teamit delegation in ou. this group teamit need full rights in ou , ou childs objects. the restrictions group teamit : - add / remove in security group in ou members of ou. - deny members of group teamit change option password never expires do think if it's possible ? i try add in security (advanced menu) of ou group teamit, deny write useraccountcontrol after it's not possible create user account in ou. hi, far know, there no such built-in method deny permission “password never expires” option. "password never expires" controlled useraccountcontrol, if deny permission write useraccountcontrol, affect several account settings. here similar thread, refer more details it: remove ability set password never expired helpdesk group https://social.technet.microsoft.com/forums/windowsserver/en-us/115a0ec9-a380-4453-8c48-8a4848168613/remove-the-ability-to-set-password-never-expired-for-helpdesk-group?forum=winservergen b...

hi. installed server 2008 on machine asrock p67 extreme4 gen 3 mobo. everything's fine, except can't install usb port drivers. there no server 2008 drivers motherboard on asrock site. can drivers usb ports server 2008? possible? thanks, i have driver cd mobo, server 2008 won't allow me install them. says wrong platform. windows detect them. appear in device manager. else fine. need usb ports work can hook printer. if have vista drivers, may  try installing driver using compatibility mode. vista drivers works on ws 2008, being said, there chances vista drivers might not work @ all, it's matter of luck. also, the vista drivers available similar mother board series, 1 or other may work, again there no assurance if work. p67 extreme4 gen3 or p67 pro or fatal1ty z68 professional gen3 or p65icafe or b75 pro3-m   good luck ! regards, santosh not represent organisation work for, opinions expressed here own. posting provided ...

i've read should not run dhcp on dc.  reason this: security? performance? other?  i've got couple hundred pcs on net , believe dcs could handle performance standpoint.  help. curt 1." always dynamically update dns , ptr records" - mean asking dhcp register dns records on behalf of client machines. run dhcp on dc, dhcp not register records in dns unless set credentials (standard user credentials). can create 1 user , use credentials dns registration, don't need use admin accounts. 2. instead of above option can use option "dynamically update , ptr records if requested dhcp client machines". if select option, client register records  , dhcp register ptr records. need set credentials registering ptr records. we need use 1 of above 2 options. 3. dynamically update dns , ptr records dhcp clienst not request updates (for example, clients running windows nt 4.0) - option can selected if have network printers/downlevel clients (95/98/nt) or third party os does...

hello everybody wrote time ago because trying list files in directory datagridview using costum columns. actually, in datagridview have multiple contextmenustrip, because 3 directories listed , need diferent contextmenustrip each one: http://www.pastie.org/1495787 idea how put diferent contextmenustrips in same datagridview depending on row? thank reading, dani figure out in c# , can convert :) its .net question, not ps question. im sure in .net forum better. if code can convert it. Windows Server  >  Windows PowerShell

w2k3 2-node cluster running sql 2008. when attempting start cluster service on primary node returns following error: could not start cluster server on local computer. error 1067: process terminated unexpectedly. when viewing logs see following: an error occurred attempting open cluster node 'node name' not enough resources available complete operation. error id: 1721 (000006b9) i've applied fixed listed in kb article adding 1024 - 65535 ports: http://support.microsoft.com/kb/826154 once applied able start cluster service , launch cluster administrator on node. few weeks have gone , starting experiencing same issue on same node. second node fine @ point i'm considering evicting node , adding see if it'll resolve issue. before doing figured i'd reach out see if may familiar particular issue. any responses appreciated. hi,   before evicting node, please make sure have tried suggestions in http://support.microsoft.com/kb/826154 again. ...

i have vm has 2 nics, 1 facing inward local network , other nic facing public internet. the public nic has 13 of 14 available public fixed ip address block assigned it and vm responds of them fine, is, until vm moved server. when vm moved host peculiar thing happens. vm responds fine main ip address of nic, packets sent other 12 ip addresses configured on nic, packets never make nic. or @ least i can't see them , neither can vm. the 2 hosts vm moved between both have same type network adapter , connect cisco router routing duties public internet , sits on 14th ip address of public fixed ip address block default gateway. if move vm 1st host, ip addresses respond, if move 2nd host, vm responds main ip address assigned on nic. i can recover cycling power on cisco router! ip addresses respond on host vm on when cisco had power cycled. if vm moved other host same issue again. i guess works because forces router to refresh its internal routi...

good afternoon everyone! i have created basic cluster , using select quorom configuration trying select "node , fileshare majority".  share try enter in shared folder path errors " xx not valid file share path".  share available server can run unc , access it.  have made sure account (as installer) , computer account have full access share (share , file level permissions).  note share in domain other domain cluster resides...however there full trust. so, gave go command line.  looked created gave me error "system error 1808 had occurred (0x000000710). account used computer account.  use global user account or local user account access server. i use command cluster resource , can see resource when try bring online, error: system error 87 has occurred (0x00000057).  parameter incorrect. does know doing wrong? the reason using share because netapp file share , highly available.  use domain controller...

good evening. there windows 2012 server file server (hyper-v vm, joined in domain). wanted turn "audit object access" track file deletions. created group policy dc relevant policy , set security filtering policy applies file server. configured auditing @ folder want track. after gpupdate saw @ event viewer, security log, had stopped record various "audit success" , "audit failure" events logged before gpupdate. erased group policy , run gpupdate no result. having exported virtual machine month ago, imported offline , started looking. in local gpedit.msc had nothing configured audit policy , advanced audit policy configuration. unconfigured. running auditpol.exe / / category: * pulled several categories enabled, while running same command on live server unconfigured. run auditpol / backup in offline , auditpol / restore live , settings restored. security log began record again. activating gpo dc again settings lost again , security log stopped again...

steps create , deploy group policy in server 2008. hi, please more specific on want achieve. asking settings wsus or group polcies please refer : http://technet.microsoft.com/en-us/windowsserver/bb310732  - there many links here understand better please refer specifix wsus : http://technet.microsoft.com/en-us/library/cc720539(ws.10).aspx regards, mohan r sr. administrator - server support Windows Server  >  WSUS

i migrated 2003r2 server 2008r2 running on new hardware.  in doing migration ias , cert services carried across in order support client's wireless network. i checked ca (enterprise ca running on new server pdc) , looked operating correctly. i checked nps network policies, seemed correct i checked wireless gpo - good this started go bit pear shaped - when attaching wireless clients, reported not connect. checked event logs nps , found numerous event id 6273 entries with logging results: accounting information written local log file. reason code: 23 reason: error occurred during network policy server use of extensible authentication protocol (eap). check eap log files eap errors. q uestion 1 - eap log files located? these errors co-incided system log schannel errors 36888 extremely cryptic description: the following fatal alert generated: 20. internal error state 960. i tracked event down , appears related invalid certificate.  became interesting, r...

hi, i can't use fqdn access web site hosted same machine provides web server, other computers, whether external or internal lan, can access server , authenticated without problem.   the situation similar loopback check issue in kb896861 except don't have error 401.3, browser complains don't connectivity. host trying access cannot pinged, did resolve correct ip. the server virtual host running windows server 2008 , iis 7 in hyper-v. have external public dns resolves fqdn public ip supplied our provider; , map public ip private ip of virtual host.    i tried disable loopback check detailed in kb article, not work. please help. thank you. reggie     expect happen. fqdn resolve public ip. if on server (or other machine on private network), address not web site. works public ip because of mapping.   see web site form inside privte network need use local ip, or modify internal dns point server's private address. you cannot use mapp...

how draw ou active directory structure (tree style) without visio/ad topology diagrammer? ad topology diagrammer great tool, not work on recent vision builds/architectures and, of course, demands visio license ok, how draw ou structure, not "gui" style, maybe in "tree" style, in text? there  tool draw ad ou structure? of course drawing in way create image useful creating text/ascii style wil niece to, anyway, without adtd, tool welcome any ideas? hi  as know ad topology diagrammer best tool this,maybe you should check compability free visio viewer; https://www.microsoft.com/en-us/download/details.aspx?id=35811 https://blogs.office.com/2012/11/28/download-the-free-microsoft-visio-viewer/ also check "active directory diagram" tool , try free edition; http://www.conceptdraw.com/how-to-guide/active-directory-diagram this posting provided no warranties or guarantees,and confers no rights. best regards burak uğur ...

problem that, in systems need edit registry download content file wsus server. mean need change port 443 port 80. wsus server name :- http:\\wsusservername:80 but in systems don't need edit in registry.systems download patches wsus server using port 443. wsus server name :- https:\\wsusservername:443 can please help me what we need require resolve issue. the first step should take identify source of wsus settings these clients receiving. if these settings deployed via gpo you'll want verify settings declared in computer configuration > administrative templates > windows components > specify intranet microsoft update service location. you may find following information useful troubleshooting particular issue.  http://technet.microsoft.com/en-us/library/cc708627(v=ws.10).aspx *edited add in reference link. ...

hi guys, ive got strange problem , second time ive encountered this. the thing cant connect server rdp client. gives me warning user account not authorized remote login. client:workstation windows 7 64 bit , server: windows 2012 r2 im using following group policy enable local admin rights , rdp rights: policies\windows\settings\security settings\local policies/user rights assignment allow log on through terminal services xxxx\g-bp-localserveradmin-remotedesktop, xxxx\domain admins, xxxx\administrator restricted groups group members  member of xxxx\g-bp-localserveradmin-remotedesktop  builtin\remote desktop users, builtin\administrators administrative templates\network/network connections/windows firewall/domain profile windows firewall: allow inbound remote desktop exceptions            enabled   windows components/remote desktop services/remote desktop session host/connections allow users ...

our server environment windows server 2003. need remove ts per device licenses on licensing server. has told me uninstall/reinstall licensing server removes cals. there better way remove ts per device cals? if uninstall/reinstall licensing server cause downtime/interruption on our terminal server operation? thanks, hi,   for rebuild terminal licensing server, can refer kb: how rebuild windows 2000 , 2003 terminal services licensing database http://support.microsoft.com/kb/273566/en-us   in each of these cases, must call microsoft clearinghouse reinstall appropriate cals. information how call clearinghouse, see locate microsoft clearinghouse telephone number country or region .   for second question, can refer thread in our forum. http://social.technet.microsoft.com/forums/en-us/winserverts/thread/80b9776e-318b-42cc-9a8a-36d0326b2013     technology changes life…… ...

hi  i have 2 node microsoft 2008 r2 failover cluster in same site. in each node have 4 network adapter while creating failover clustering added 2 network adapter 1 cluster communication , client communication public use. can clarify doubt 1) need use pair of network use client communication, possible how can configure same existing ip address new network 2) if 1 node network adapter failed how can add network in same cluster network please help. -rujin hi,   please check following guide.   changing ip address of network adapters in cluster server http://support.microsoft.com/kb/230356   vincent hu technet community support Windows Server  >  High Availability (Clustering) ...

is windows media sharing supported in windows server 2008?   i using server 2008 rc0 month, , cannot find way use windows media sharing, i've found out "windows media player network sharing service" missing in local services page , these files missing in "program files\windows media player" folder: wmpnetwk.exe wmpnscfg.exe wmpnssci.dll   and file missing "windows\system32" wmpmde.dll   these i've found comparing vista ultimate server 2008, "tools->options->library->configure sharing" disabled in windows media player 11 in server 2008.   so question windows media sharing supported in release version of windows server 2008 or possible install feature somehow (i've tried install service manually registry somewhere gets error), because need on server 2008.   thanks time, sadjad bahmanpour it's not implemented feature , not available. have media services let serve content server. if really need...

i added second server (wss 2012r2) essentials domain means of standard setup (connector). server present in dashboard , "lights" green. when try add server folder new server not present in list.  have tried cannot seem te storage via "add folder" in dashboard. domaincontroller , second server on different locations , connected via ipsec. when add standard 2012r2 server domain in same subnet (in datacenter) work.... ideas anybody? regards, folkert hi, a server folder cannot added or moved following locations , result in error if of these locations selected additions or moves: 1. hard drive not formatted ntfs or refs file system 2. %windir% folder 3. mapped network drive 4. folder contains shared folder 5. hard drive located under device removable storage 6. root directory of hard drive (such c:\, d:\, e:\) 7. sub-folder of existing shared folder 8. member server running windows server 2012 r2 essentials or window...

server: ms server 2012 r2 clients: windows 10 (1511 , 1607) we're using gpo create scheduled task, scheduled task not showing in task on client side. we've tried following: - run nt authority\system , %logondomain%\%logonuser% - ran task create/update/replace - tried creating under computer , user configuration part of task copy necessary file specific folder, part works files show (the gpo applied if run gpresult). there not task being created in task scheduler. i checked xml in sysvol , there no invalid characters. the task following: opens wscript run .vbs file, .vbs file makes sure file that's called argument gets executed in background doesn't bother user. looks following: i'm pretty out of ideas of else can try task created @ point. > we're using gpo create scheduled task, scheduled task not showing in task on client side.   as suggested: "gpresult /h report.html" - gpo applied? results report contain task...

i setting up streaming media services on new computer school work, replacing low-spec machine has been working faultlessly 5 years. the old computer runs windows media services on standalone machine running server 2003. have hundreds of wmv files ranging 50 mb 1gig in size average bitrate of 1500mbps. typically buffering on machine 5-10 seconds. can serve dozen files simultaneously without issues. the new machine runs server 2008 r2 , has higher specs. i have set 2 1gig nics, each different ip address, using standard setup recommended ms 1 hosting default intranet site , other streaming media services. iis , sms 2 roles on server. have not changed default settings. the requests to streaming media services are made using asx files start this: <asx version = "3.0"> <entry> <ref href = "mms://serverx/testmedia"/> .... however performance bad. on windows media player client, for 100mb file ...

Здравсвтвуйте. Чтобы предоставить удаленный доступ к контроллерам домена создал групповую политику и определеил параметр allow log on throw remote desktop . Все работало до недавнего времени. Первым делом проверил результирующую групповую политику rsop Там все в порядке, отображается именно тот параметр который необходим, из той же групповой политики. Если я правильно понимаю, то после применения групповой политики целевая группа должна отображаться в свойствах удаленного рабочего стола, но ее там нет. Пробовал gpupdate /force несколько раз, не помогло. уровень домена 2003 Какие есть идеи? что можно сделать? Здравсвтвуйте. Чтобы предоставить удаленный доступ к контроллерам домена создал групповую политику и определеил параметр allow log on throw remote desktop . Все работало до недавнего времени. Первым делом проверил результирующую...

hi first post here goes.... we have 2003 r2 server several volumes, dfs replication groups can created , replicate fine apart on 1 volume. the volume in question mounted volume. can select folders volume using dfsr wizard , group creates without errors , can see in ad etc. when 2003 r2 server picks groups settings fails stating repliation unable start because volume not supported, gives volume guid id. here's funny part, volume guid in event log different volume 1 selected during dfsr group creation wizard. added folders e:\ drive when dfsr group tries start uses guid q:\ drive. both volumes have different guid's seen using mountvol , in registry. this happens on 1 mounted volume, removed unwanted drives registry etc still can't replication work on 1 particular mounted volume. have 3 other servers similar configuration , replicating data mounted volume. has got ideas why when create replication group on e:\foldername mounted volume picks guid of volume. ...

what trying on startup have script run (this new server only) looks @ ip assigned system (192.168.0.44) .. take last octet (44) , add newserver newserver44  $octet =  add-computer -domainname $domain -newname "newserverxx" -credential $credential -force -restart i have tried . splt .. can not work thanks $ip = (get-wmiobject win32_networkadapterconfiguration -filter 'ipenabled=true').ipaddress[0] $lastoctet = $ip.split('.')[-1] $newservervar = "newserver$lastoctet" $newservervar Windows Server  >  Windows PowerShell

hi all, i want give permisson helpdesk team reset password , unlock account,how do when right click ou , choose delegate control cannot find account lockout related option,and don't want helpdesk team create or delete users,how achieve this.   thanks in advance     abubakar mirasa dubai,uae dubai, microsoft specalist hello, please see following articles: http://support.microsoft.com/kb/294952/en-us also have into: http://support.microsoft.com/kb/932455   http://support.microsoft.com/kb/296999   http://blogs.dirteam.com/blogs/jorge/archive/2006/01/05/369.aspx best regards meinolf weber disclaimer: posting provided "as is" no warranties or guarantees , , confers no rights. Windows Server  >  Directory Services ...

if to  change "password must meet complexity requirements" in our company domain "disabled" "enabled", is enforced automatically (immediately) users (and or more importantly service accounts) change password meet new complexity rule, or upon next password change - whenever cycle , forced change (or on manual basis exempted cycle)? not sure on 1 i've never changed 1 parameter mid-stream before. think it's later, want sure! thanks! it applies changed passwords or newly created passwords. http://technet.microsoft.com/en-us/library/cc786468(v=ws.10).aspx users existing uncomplex passwords not prompted unless password set expire. if answer helped you, check out blog: deployhappiness.  subscribe rss  or email.   Windows Server  >  ...

ftp page not displaying after typing url. can sign on command line still dosent show folder i guess you're running iis ftp? have configured ntfs rights specific user you're using logon? here you'll find walkthrough , troubleshooting guide: http://learn.iis.net/page.aspx/263/installing-and-configuring-ftp-on-iis-7/ best regards joachim nässlander it-expert, knowledge factory ( http://www.knowledgefactory.se ) mvp cluster member of microsoft extended experts team (meet) blog: http://www.nullsession.com Windows Server  >  Windows Server General Forum

hi, i have dataset created calling sql stored procedure.  from results selecting , creating variable ($45, $28, $14) based on number of row returned.  if more 1 record set has searched number powershell returns both of them appears 1 record.  code follows:   $connstring = "xxxx;" #first sp exec dbo.xxxxx_generate_alerts ################################################################# $querytext = "exec dbo.suppliers_generate_alerts" $sqlconnection = new-object system.data.sqlclient.sqlconnection $sqlconnection.connectionstring = $connstring $sqlcommand = $sqlconnection.createcommand() $sqlcommand.commandtext = $querytext $dataadapter = new-object system.data.sqlclient.sqldataadapter $sqlcommand $dataset = new-object system.data.dataset $dataadapter.fill($dataset) $data = $dataset.tables[0] $connection.close() #these search through returned $dataset.  the alertcountdown has been set in sql stored...

i have 2 clusters running without issues. 1 located in branch office , 1 located in our datacenter.  these clusters providing ha sql 2008 r2 services. @ branch site have nightly backup dumps backup drive. drive resource of sql application. works great no matter server active owns shared backed drive. i want use dfs move backup datacenter now. here's did 1) added files servers (dfs, , replication) both nodes @ remote site, , both nodes in datacenter 2) added file server resource sql application group @ remote site , created "replicate" share 3) added files server resource sql application group @ datacenter , added "replicate" share 4) try create replication group. think have use sql client access point. when seems accept when have specify "add folder replicate", error "myserver.mydomain.com: not possible enumerate physical disk drives in cluster resource group. cluster group not found". folder trying add g:\replicate. can ma...

hello, we use microsoft remote desktop 8.0.9 os x (not ios) on workstation running os x 10.10 (yosemite). when open connection on our ts farm (four win2008r2 ts nlb service , vip, talking win2008r2 broker), microsoft remote desktop client need first authentication on ts responding (at vip address), , after need second authentication on ts attribuated via broker). do know how correct problem? regards, chris hi chris, thank posting in windows server forum. have r gateway in environment? please enable following group policy , verify. - allow delegating default credentials - allow delegating default credentials ntlm-only server authentication  can find policies follows: computer configuration\administrative templates\system\credentials delegation add " termsrv/* ” (without quotes) both policies content.  more information. how enable single sign-on terminal server connections http://blogs.msdn.com/b/rds/archive/2007/04/19/how-to-...

hi all, first post here. i'm having odd problem server 2008 r2.  as per title, logged server account (domain administrator). see desktop see belongs a. insufficient rights error when try open window such computer or server management. i noticed when opening command prompt, showing in c:\users\b instead of c:\users\a. when try access c:\users\a in command prompt says "the directory name invalid ". would appreciate troubleshoot issue. regards, update. managed resolve this. http://social.technet.microsoft.com/forums/en-us/476d23b4-5cb8-4715-a0bf-4741f5305ff1/cannot-open-access-control-editor-access-denied this pretty got rid of permission issues. deal nagging complain recycle bin being corrupted. :) regards, Windows Server  >  Windows Server General Forum ...

hi all, i working automate inactive user reporting. have created script create report based on different ou's , save xls files in folder ou name. send reports divisions. the requirement generate report in organisational excel template. have saved template shared folder. report getting generated fine first ou mentioned in input file next ou's headings getting created in correct row/coloumn , colour data not getting populated. there doing wrong. ================================================================================== add-pssnapin quest.activeroles.admanagement set-qadpssnapinsettings -defaultsizelimit 0 $reportmonth=get-date -format "mmm-yy" $comparedate=get-date $numberdays=90 get-content "d:\inactiveusers\oupath.txt" | foreach-object{ $oupath=$_ $excel = new-object -com excel.application $excel.visible = $true $wbook = $excel.workbooks.open("d:\report.xls") $wsheet = $excel.worksheets.item(1) $wsheet.ce...

hi. our shared drive size requirements have exploded. want know if idea start making shared drives formated in exfat opposed ntfs. all of our systems (about 120) running windows xp pro sp3. have no plans in deploying windows 7 or os x machines. initial trials of win 7 , os x machines way too problematic.  if need additional info give advice, please ask.   thank you qx9650 w/ 4gb patriot viper on ga-x38-dq6 running vista home premium well, go ntfs, way have file security options , control, making sure hardware(drives) of shares have level of raid implemented ensure uptime , mitigate loss of data, in conjunction backup plan. :p advice offered, if need more advised seek council , advice of paid professionals. answer 42, or reboot. Windows Server  >  File Services ...

hi, i've built windows server 2012 r2 server, running powershell dsc. however, error in screenshot after compiling mof. suggestions why? hi gss1, sorry delay. please refer " client-side authentication error: kerb0x8009030eerror " section in following article , check if can you. windows server 2012 - server manager troubleshooting guide, part ii: troubleshoot manageability status errors in server manager please refer following technet article. start-dscconfiguration best regards, justin gu please remember mark replies answers if , unmark them if provide no help. if have feedback technet support, contact tnmff@microsoft.com. Windows Server  >  Management

    there no more space in original disk on file server, note: both file server , disks based on vm , shared database . plan add 1 fresh disk resolve problem of insufficient disk space, , wanna know whether dfs able fix following situation or not? no 1.  keep original folders , documents unchanged, such p:\dept\sales\kevin.xlsx, p:\ mapping driver on client , linked d:\dept\sales on file server. decide use standalone of dfs create 1 connection new disk. client, feel nothing invariable, when uploads , change original data, data should saved in new disk rather old one. no 2 . keep folder permission unchanged in contrast old folders or files. is dfs useful make them come true? if not, whether there better method exists. hi, from description, setup stand-alone namespace newly created files saved new hard disk (maybe drive e) instead of drive d out of space. i'm afraid stand-alone namespace not work this. cannot assign 2 folders on same server as same d...

hello, i have configured smtp relay service on windows server 2012 r2. , working fine. my concern can tracked mails sent through relay servers can track on exchange servers or there free ware or tools gather such logs. balwan singh hi balwan singh, thank question. trying involve familiar topic further @ issue. there might time delay. appreciate patience. thank understanding , support. best regards, candy please remember mark replies answers if help. if have feedback technet subscriber support, contact tnmff@microsoft.com . Windows Server  >  Server Manager

hi run web based app customer. clients go buzz.customer.com, set on customer's dns alias app.mycompany.com. forwards traffic customers our public ip , allows them access. have internal server handles transactions in line web site. noticed time out on connections , have narrowed down error. nslookup on internal server in question doing nslookup , result: > buzz.customer.com server:  dns.mycompany.com address:  10.1.1.18 non-authoritative answer: name:    app.mycompany.com address:  64.84.124.4 aliases:  buzz.customer.com > every nslookup following presents: > buzz.customer.com server:  dns.mycompany.com address:  10.1.1.18 non-authoritative answer: name:    app.mycompany.com address:  10.1.1.134 aliases:  buzz.customer.com initial lookup messing internal server , causing not found error, because server needs hit internal address alias of time. temporarily fixed lookup issue putting entry in hosts file on server in question, think doing more loo...

background: - several months windows 2008 r2 domain existed dc, , ad.  windows servers apart of domain.  1 of servers being windows 2008 r2 server remote desktop services loaded.  server licensed 8 user cals.  operating correctly.  since time domain has been removed, dc removed , ad removed.  left windows 2008 r2 servers in workgroup.  again, 1 being remote desktop server. q1. can functioning per user cals (totaling 8) remain per user cals? q2. required to switch them to 8 per device cals? referencing: "best practices setting remote desktop licensing...." - article 2473823 in above article states under "rds host , rds licensing servers in same workgroup" "we can use per device cals in workgroup environment. so, should install per device cals on rds licensing server." ( in case both same server. any information regarding licensing options can used on workgroup rds server appreciated. hi, ye...