Manual IP different from Gateway ip .internet not working

-

we have internet connection , using cisco router and sonic wall firewall. firewall ip 192.168.0.1 /24. default gateway us.

i installed windows server 2008 in secretary-pc , configured manual ip 10.10.10.2 / 24 , dns > 10.10.10.2 , default gateway 192.168.0.1.

but internet not working ....

 

hi irsath

the ip address of 2008 server in different subnet of specified gateway. 192.168.0.x/24 , 192.168.1.x/24, if routing incorrect set not work. mentioned cisco router , disabling dhcp option i'm assuming dont infact have windows server dhcp server infact using router dhcp server.. why because router should have solved problem.. connect 2008 server , clients switch, connect swicth cisco router on free eth port , assign ip address in same subnet ur lan e.g 192.168.1.254 port u connect to. connect firewall port on router , give address in different subnet e.g 192.168.0.254/24 route packets e.g ip route 0.0.0.0 0.0.0.0 192.168.0.254 , on firewall make necessary routin configs e.g route 0.0.0.0 0.0.0.0 237.345.x.x (whicheva public address connects u internet), or jus remove sonicwall firewall place external ip address on cisco router route 0.0.0.0 0.0.0.0 237.345.x.x (wcheva external address u have or otherwise) , set madd access-lists ur router acts more or less firewall low level firewall hehe, infact issue u need go cisco forum or other networkin forum coz theres involved wnt dare write down here hehe ;) hope u @ least idea gave ya

 

good luck :)



Windows Server  >  Network Access Protection



Comments

Post a Comment

Popular posts from this blog

Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

-
hello, i'm getting error when trying add print services role in windows 2012 standard. i'm getting same error whether use gui or powershell. this new server install. the powershell error follows: add-windowsfeature : request add or remove features on specified server failed. installation of 1 or more roles, role services, or features failed. the referenced assembly not found. error: 0x80073701 at line:1 char:1 + add-windowsfeature print-services + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~     + categoryinfo          : invalidoperation: (@{vhd=; credent...name=localhost}:psobject) [install-windowsfeature],     exception     + fullyqualifiederrorid : dismapi_error__failed_to_enable_updates,microsoft.windows.servermanager.commands.addwind    owsfeaturecommand success restart needed exit code      feature result ------- -------------- ---------      -------------- false   no             failed         {} issue appreciated. hi, i think should st
Read more

Disconnecting from a Windows Server 2012 R2 file sharing session on a Windows 7,8,10 machine

-
i've been trying disconnect server while , haven't been able to. there quick way this? i've used net session , net user , work sometime never consistent. can task? hi yrusad, thanks post. does work when check “computer management > system tools > shared folders > open files/sessions”. directly manage from gui. and based on knowledge, quick way mentioned net session /delete /y. mean never consistent? best regards, mary please remember mark replies answers if , unmark them if provide no help. if have feedback technet subscriber support, contact tnmff@microsoft.com . Windows Server  >  Windows Server 2012 General
Read more

Windows 2016 RDS event 1306 Connection Broker Client failed to redirect the user... Error: NULL

-
Image
i'm attempting setup windows 2016 rds standard deployment session hosting.  layout follows: rds01 - rds connection broker , web access ts02 - rds session host ts03 - rds session host domain these servers part of has (1) windows 2008 server , (2) windows 2016 servers acting dcs.  domain running @ windows 2003 functional level. servers on single routed network no firewall between them.  dns , ptr records servers exist , resolve on hosts.  servers can pinged each other. in other words, there no network connectivity issues. i've setup rds deployment several times w/ same results. the issue can login via rdweb interface on rds01 win10 desktop , connect published rdp desktop without issue (i.e. no error messages user) , no errors in logs.  when try directly rdp rds01, authenticate user (per event log) error stating user doesn't have access system.  in event log event id 1306 message of "remote desktop connection broker client failed redirect user &
Read more